VoxBox Pro Mirror Box MKII Interview Kit, incls Hard Case
VoxBox Pro Mirror Box MKII Interview Kit, incls Hard Case
- Marke:
- PrimeLight Design
Vox Box Pro
The VoxBox Pro is a mirror box that positions in front of the camera lens. It allows filmmakers to shoot down-the-lens interviews while maintaining eye contact between the interviewer and the subject.
The interviewer and subject see each other though the mirror, but the subject is actually looking down the lens, resulting in the direct eye contact with the audience. It relaxes the subject and allows them to deliver powerful stories and credible interviews. There are no additional cameras, TV screens or technology requiered.
- Fits in seconds to existing 15mm rails, or to a lighting stand
- Lightweight aluminium construction – built to last a lifetime
- Converts to a Teleprompter using the included tablet holder
- Complete with superior quality hard case and laser-cut foam
- Can be stored in the case fully rigged ready for instant use
How It Works
The interviewer and subject see each other though the mirror, but the subject is actually looking down the lens, resulting in the direct eye contact with the audience. It relaxes the subject and allows them to deliver powerful stories and credible interviews. There are no additional cameras, TV screens or technology requiered.
Be Ready To Roll In Minutes
There are no cumbersome tripod plates or adaptors to fit – the unit simply attaches in place of your matte box to existing 15mm rails.
If you don’t have rails or you are using a DSLR, the kit includes a 16mm receiver allowing it to be mounted on standard lighting stands.
Portable and Flexible
Challenging spaces are no problem for the VoxBox Pro – the unit can be quickly configured to allow the interviewer to sit at one of several possible positions.
For shooting-producers/directors or camera operators, the unit comes with a side mirror which allows operation of the camera whilst maintaining eye contact with the subject through the VoxBox Pro. This flexibility allows you to quickly adapt to each location,
Designed For Busy Crews
With schedule pressures on location, the VoxBox Pro makes life easier when shooting down-the-lens interviews. It can be stored fully assembled in the case so you’ll always be ready to shoot in minutes. This ultra-quick setup allows you to spend more time getting the shot right – not trying to attach cumbersome adaptors and balance tripod plates.
The sturdy, aluminium construction withstands day-to-day handling and uses hardware fixings throughout.
Everything you need, in one box
Owning the VoxBox Pro means you can offer your clients this unique kit without the inconvenience of hiring similar units.
There are no extras to purchase – everything you need is in the case.
Specifications |
|
Weight of main box with beamsplitter glass |
1.9kg (4.1lbs) |
Dimensions of main box, without mounts |
D205mm (10 x 8 x 8 inch) |
Aperture at rear of main box |
140mm (5.5 inch) |
Widest focal length (super 35 sensor) |
Approx 24mm |
Widest focal length (full-frame sensor) |
Approx 30mm |
Tablet holder maximum device size |
188mm (7.4 inch) (measured between the two clamps) |
Light loss through beamsplitter glass |
<1 stop Case & Packaging |
External Dimensions |
W555 x H306 x D428mm (21.8 x 12 x 16.8 inch) |
Temperature Rating |
‘-30 / 90°C (-22 / 194°F)’ |
IP Raiting |
IP67 |
Packaging dimensions, as shipped |
580 x W440 x H340mm (22.8 x 17.3 x 13.3 inch) |
Weight including contents |
8.8kg (19.4 lbs) |
Total weight, as shipped |
9.8kg (21.6 lbs) |
In the box
- Main box
- Beamsplitter glass
- Tilting side mirror
- Tablet holder
- Doughnuts (63, 80 & 112mm)
- 16mm receiver
- Printed instruction manual
- Hard Case with laser-cut foam